Straight racks
Gambini Meccanica manufactures top quality racks both with straight and helical tooth system by employing several typologies of raw materials.
We produce racks from module 0.5 until module 42, from quality 5 to quality 10.
Quality 5 racks with a maximum one-piece length of 1000 mm, quality 6 racks with a maximum one-piece length of 2000 mm and lower quality racks with a maximum one-piece length of 3000 mm.
Request the technical brochure about the transmission force of our rack and pinion systems.
Customized products
One of the most important element in Gambini Meccanica is the planning service: a team of specialized technicians can offer customized products thanks to a continue research in collaboration with its customers.
Products range index
| SERIES | QUALITY | MATERIAL | HEAT-TREATMENT | HRC | SURFACE | DRILLING | MODULES |
|---|---|---|---|---|---|---|---|
| 105H | 5 | 16MnCr5 | carburized and induction-hardened teeth | 60 | ground | yes | 2_3_4_5_6 |
| 105 | 5 | 16MnCr5 | carburized and induction-hardened teeth | 60 | ground | no | 2_3_4_5_6 |
| 110H | 6 | 16MnCr5 | carburized and induction-hardened teeth | 60 | ground | yes | 1_2_3_4_5_6 |
| 110 | 6 | 16MnCr5 | carburized and induction-hardened teeth | 60 | ground | no | 1_2_3_4_5_6 |
| 115H | 6 | C45 | induction-hardened teeth | 55-58 | ground | yes | 1_1,5_2_3_4_5_6_8_10_12 |
| 115 | 6 | C45 | induction-hardened teeth | 55-58 | ground | no | 1_1,5_2_3_4_5_6_8_10_12 |
| 120H | 6 | SAE1141 | induction-hardened teeth | 56-60 | ground | yes | 1_1,5_2_3_4_5_6 |
| 120 | 6 | SAE1141 | induction-hardened teeth | 56-60 | ground | no | 1_1,5_2_3_4_5_6 |
| 125H | 7 | C45 | induction-hardened teeth | 55-58 | ground | yes | 2_3_4_5_6 |
| 125 | 7 | C45 | induction-hardened teeth | 55-58 | ground | no | 2_3_4_5_6 |
| 130H | 7 | SAE1141 | induction-hardened teeth | 56-60 | ground | yes | 2_3_4_5_6 |
| 130 | 7 | SAE1141 | induction-hardened teeth | 56-60 | ground | no | 2_3_4_5_6 |
| 132H | 8 | C45 | induction-hardened teeth | 55-58 | ground backside, ground teeth | yes | 2_3_4_5_6 |
| 132 | 8 | C45 | induction-hardened teeth | 55-58 | ground backside, ground teeth | no | 2_3_4_5_6 |
| 134H | 8 | SAE1141 | induction-hardened teeth | 56-60 | ground backside, ground teeth | yes | 2_3_4_5_6 |
| 134 | 8 | SAE1141 | induction-hardened teeth | 56-60 | ground backside, ground teeth | no | 2_3_4_5_6 |
| 135H | 8 | C45 | induction-hardened teeth | 55-58 | milled | yes | 2_3_4_5_6 |
| 135 | 8 | C45 | induction-hardened teeth | 55-58 | milled | no | 2_3_4_5_6 |
| 140H | 8 | SAE1141 | induction-hardened teeth | 56-60 | milled | yes | 2_3_4_5_6 |
| 140 | 8 | SAE1141 | induction-hardened teeth | 56-60 | milled | no | 2_3_4_5_6 |
| 145H | 8 | 42CrMo4 | not included | – | milled | yes | 2_3_4_5 |
| 145 | 8 | 42CrMo4 | not included | – | milled | no | 2_3_4_5 |
| 150H | 9 | C45 | not included | – | cold drawn | yes | 1_1.5_2_3_4_5_6_8_10_12 |
| 150 | 9 | C45 | not included | – | cold drawn | no | 1_1.5_2_3_4_5_6_8_10_12 |
| 155H | 9 | SAE1141 | not included | – | cold drawn | yes | 1_1.5_2_3_3,183_4_5_6 |
| 155 | 9 | SAE1141 | not included | – | cold drawn | no | 1_1.5_2_3_3,183_4_5_6 |
| 160H | 10 | C45 | induction-hardened teeth | 55-58 | cold drawn | yes | 1_1.5_2_3_4_5_6_8_10_12 |
| 160 | 10 | C45 | induction-hardened teeth | 55-58 | cold drawn | no | 1_1.5_2_3_4_5_6_8_10_12 |
| 165H | 10 | SAE1141 | induction-hardened teeth | 56-60 | cold drawn | yes | 1_2_3_4_5_6 |
| 165 | 10 | SAE1141 | induction-hardened teeth | 56-60 | cold drawn | no | 1_2_3_4_5_6 |
| 170H | – | INOX AISI 304 | not included | – | cold drawn | yes | 1_2_3_4_5_6 |
| 170 | – | INOX AISI 304 | not included | – | cold drawn | no | 1_2_3_4_5_6 |
| 175 | – | POM | not included | – | – | no | 1_1,5_1,75_2_2,5_3_3,183_4 |