Straight gears
Gambini Meccanica manufactures precision gears up to module 30, with just milled or ground profiles.
The maximum external diameter we can realize is up to 1000 mm.
We use different raw materials: C45, 18NiCrMo5, 20MnCr5, all the alloy or not alloy materials, different types of nylon, cast irons, alloys of common bronze and bronze-aluminium, alloys of aluminium, stainless steel and different typologies of Bakelite.
Request the technical brochure about the transmission force of our rack and pinion systems.
Customized products
One of the most important element in Gambini Meccanica is the planning service: a team of specialized technicians can offer customized products thanks to a continue research in collaboration with its customers.
Products range index
| SERIES | QUALITY | MATERIAL | HEAT-TREATMENT | HRC | SURFACE | HUB | MODULES |
|---|---|---|---|---|---|---|---|
| 400 |
5e24 | 20MnCr5 | case hardening | 60 | ground | short | 1.5_2_3_3.183_4_5_6_8_10 |
| 405 |
5e24 | C45 | induction-hardened teeth | 55-58 | ground | short | 1.5_2_3_3.183_4_5_6_8_10 |
| 410 |
5e24 | 20MnCr5 | case hardening | 60 | ground | long | 1.5_2_3_3.183_4_5_6_8_10 |
| 415 |
5e24 | C45 | induction-hardened teeth | 55-58 | ground | long | 1.5_2_3_3.183_4_5_6_8_10 |
| 420 |
6e24 | 20MnCr5 | case hardening | 60 | ground | short | 1.5_2_3_3.183_4_5_6_8_10 |
| 425 |
6e24 | C45 | induction-hardened teeth | 55-58 | ground | short | 1.5_2_3_3.183_4_5_6_8_10 |
| 430 |
6e24 | 20MnCr5 | case hardening | 60 | ground | long | 1.5_2_3_3.183_4_5_6_8_10 |
| 435 |
6e24 | C45 | induction-hardened teeth | 55-58 | ground | long | 1.5_2_3_3.183_4_5_6_8_10 |
| 440 |
7e25 | 20MnCr5 | case hardening | 60 | ground | short | 1.5_2_3_3.183_4_5_6_8_10 |
| 445 |
7e25 | C45 | induction-hardened teeth | 55-58 | ground | short | 1.5_2_3_3.183_4_5_6_8_10 |
| 450 |
7e25 | 20MnCr5 | case hardening | 60 | ground | long | 1.5_2_3_3.183_4_5_6_8_10 |
| 455 |
7e25 | C45 | induction-hardened teeth | 55-58 | ground | long | 1.5_2_3_3.183_4_5_6_8_10 |
| 460 |
9e25 | C45 | not included | – | milled teeth | short | 1.5_2_3_3.183_4_5_6_8_10 |
| 465 |
9e25 | C45 | not included | – | milled teeth | long | 1.5_2_3_3.183_4_5_6_8_10 |
| 470 |
10e25 | C45 | induction-hardened teeth | 55-58 | milled teeth, ground internal hole | short | 1.5_2_3_3.183_4_5_6_8_10 |
| 475 |
10e25 | C45 | induction-hardened teeth | 55-58 | milled teeth, ground internal hole | long | 1.5_2_3_3.183_4_5_6_8_10 |